Announcement

Collapse
No announcement yet.

Master cylinder residual valve removal

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • KarlL
    replied
    Hi Buelo:
    disassemble master cyl and remove rubber washer-shaped seal at the very bottom....this the last part to come out of the bore during disassembly.
    This is also a good opportunity to clean everything.

    Leave a comment:


  • tardcart
    replied
    I dont know anything about this, but you will need residual pressure to the rear drum breaks. I assume you got the split line valve from a newer car that separates the front and rear lines keeping pressure to the rear but not the front calipers?

    Leave a comment:


  • BUELOWBUILT
    started a topic Master cylinder residual valve removal

    Master cylinder residual valve removal

    Upgraded 1965 PV 544 to front disc brakes. Need info on how to remove residual pressure valve from master cylinder.
    ​​​​
Working...
X